As some of the most expensive handguards on the market, the Revgrips Handguards solve two of the biggest issues that plague others; the looks and integration with Shimano brake levers. These handguards are built to impressively high quality, and they do their job exactly as expected. They are pricey, but you definitely get what you pay for.
The Revgrips Handguards were born by needing something to bash away overgrown trails, but the folk at the brand struggled to find anything that suited their particular needs. Thus, they designed their own. Revgrips also recognized that handguards aren’t exactly the prettiest component and wanted to change that.
Their build is simple, with mounts constructed from 6061-T6 aluminium that’s been anodized to a dark grey colour to match Revgrips’ existing grey stem and grip collars. Then, the shield that’s screwed on with two Allen bolts is made from transparent polycarbonate. The pair of guards tip the scales at 132g.
These handguards look the part, the mounts are finished to extremely high quality, and the fact that the shields are transparent does a lot to solve the questionable look of handguards. Something that was a bit of a concern was the stiff polycarbonate shields. At first, I thought they would easily snap as they feel like acrylic planks. Still, after some serious bending, they proved their strength while remaining malleable enough to cope.
I’ve said this about other guards before, but installation is as easy as it gets; simply bolt the shields on with the included Allen bolts and then clamp them around your bar with the hinged clamp. You don’t have to remove your grips or disassemble any of your cockpit like you have to with other guards. You might have to move your shifter, but that’s as much effort you’ll ever have to put in.
Going back to those mounts, they solve another flaw found on other guards; they work with Shimano brakes. These can clamp in between the brake’s clamp and the support attached to the reservoir, allowing you to run your Shimano brakes butted right up to the grip while keeping the full coverage of the guard. On others, you’ll have to run your brakes a little more inboard to mount the guard in the best place, which isn’t ideal for many.
Having mounts that stretch over the top of Shimano brakes isn’t just useful for brake set up, but it also makes for easy handguard alignment. Sit them on top of the Shimano brake, and you shouldn’t need to whip out the protractor to line them up properly unless you run your brakes at different angles.
Revgrips Handguards | Value & verdict
At £80, the Revgrips Handguards are the priciest on the UK market, but you’re buying some serious quality. To compare, I really like the Sendhit Nock handguards, priced at £60. They’re mega adjustable, and they even come with a bit of protection built-in, though they’re not as well made as Revgrips’ offering.
Then there are the AVS Racing handguards, which are even more basic than the Revgrips guards, using a slide-on clamp, and they don’t offer as much coverage. I also found the shield-mounting screw to work its way loose once or twice. They cost £63.
One thing that neither of those guards comes with though is the seamless compatibility with Shimano brake levers. That in its own right has got me really liking Revgrips’ handguards. It allows me to run my levers just as I like them while reaping the benefits that handguards offer. They look great, too, and will likely find a permanent home aboard my race bike.
If you’re not one for the looks of handguards but want to avoid painful scrapes with trailside foliage, the Revgrips Handguards look great and are built to very high quality and the best bit; they integrate perfectly with Shimano levers.